Results for All Applications

Selas TriZone Burner
Line and Ribbon Burners

Selas TriZone Burner

A direct replacement for any BP/APV Turkington pipe burner. Used primarily in bakeries and where an oven's heat profile needs to be modified.

Selas Hi-Tri™ Trizone Burner
Line and Ribbon Burners

Selas Hi-Tri™ Trizone Burner

Features a new 2" 2-tube arrangement to improve heat recovery time and reduce waste in baking and other critical applications. Replaces the older 1.5" black pipe models for higher turndown.

Selas Pipe Burner Schedule 80
Line and Ribbon Burners

Selas Pipe Burner Schedule 80

Can be utilized anywhere direct flame impingement is required, such as in bakery, wire, glass and plastics industries.

Selas Pipe Burner Schedule 160
Line and Ribbon Burners

Selas Pipe Burner Schedule 160

Twice as heavy as our standard Schedule 80 pipe burners.

High Capacity, Wide Slot Burners
Line and Ribbon Burners

High Capacity, Wide Slot Burners

When you require maximum linear heat, these impingement burners are the answer.

Selas Special High Capacity Triple Slot Burners
Line and Ribbon Burners

Selas Special High Capacity Triple Slot Burners

At 60,000 BTUs per inch, these direct impingement linear burners are the most powerful in the industry.

Selas Ribbon Burners
Line and Ribbon Burners

Selas Ribbon Burners

Specially designed heating units for use where a narrow, uniform sheet or ribbon of flame is desired.

Cast-Steel Utility Ribbon Burner
Impingement Burners

Cast-Steel Utility Ribbon Burner

Ideal for small space applications requiring concentrated heat patterns.

Stainless Steel Ribbon T Burners
Line and Ribbon Burners

Stainless Steel Ribbon T Burners

Designed for limited space applications requiring concentrated heat patterns, they provide a wide range of flexibility with respect to capacities, flame patterns and sizes.

Selas Lateral Heat Equalizer
Line and Ribbon Burners

Selas Lateral Heat Equalizer

The ideal means of providing balanced heating conditions in pipe ribbon burner installations, under adverse circumstances.

Selas Pyroline<sup>™</sup> & Midget Pyroline Burners
Line and Ribbon Burners

Selas Pyroline & Midget Pyroline Burners

Pyroline Line Burners are cast iron, drilled port continuous line burners with alloy side rails. Midget Pyroline Burners are low capacity, blast, line type units.

High Velocity Burners
Velocity Burners

High Velocity Burners

Used primarily where a high recirculation rate of the products of combustion is required.

High Velocity Single Tunnel Dual Fuel Burners
Velocity Burners

High Velocity Single Tunnel Dual Fuel Burners

Nozzle-mixing high velocity burner which will burn most gaseous fuels as well as light distillate oils.

Selas Superflame™ Low NOx Medium & High Velocity Burners
Velocity Burners

Selas Superflame™ Low NOx Medium & High Velocity Burners

Designed for process temperatures 150,000 BTU/hr (KW) to 10,000,000 BTU/hr (KW), and incorporates two-stage combustion for low NOx.

XDF Burners-Dual Fuel Excess Air Burners
Velocity Burners

XDF Burners-Dual Fuel Excess Air Burners

Nozzle mixing oil or gas units designed for up to 350% excess air or on ratio firing.

Infrared Metal-Fiber Burners: Selas Apollo-Ray<sup>®</sup>
Infrared Burners

Infrared Metal-Fiber Burners: Selas Apollo-Ray®

AR Series burners are infrared metal-fiber burners with high radiance and all-metal construction and premix design. The Apollo-Ray is available in two sizes.

Selas E-Class Infrared Burners
Infrared Burners

Selas E-Class Infrared Burners

6-inch gas impingement types which generate intense, concentrated radiation. They are typically used in industrial applications (curing coatings on steel) and food applications (baking).

Selas Model F Gas Burners
Infrared Burners

Selas Model F Gas Burners

Used in a wide range of industrial applications such as battery manufacturing, pre-drying, paint flow coating, resin curing, and roofing.

Selas Model K Burners
Infrared Burners

Selas Model K Burners

7-inch size with either cast iron or special alloy components. Employs an air-gas mixture impinging directly on the finned refractory surface to produce a high-density flux of maximum radiance.

Atmospheric Gas Burners
Atmospheric Burners

Atmospheric Gas Burners

Atmospheric gas burners designed for high turndown ranges on all types of combustion chambers or furnaces operating under a negative pressure.

PC Series Package Oven Burner
Air Heating Package Burners

PC Series Package Oven Burner

These burners can be installed in a process plant recirculation system where it is not possible to construct a combustion chamber and install a conventional type of burner assembly.

PH Series Package Oven Burner
Air Heating Package Burners

PH Series Package Oven Burner

Air heating burners that direct combustion air across distribution air foils to heat fresh or recirculated air in ovens, air ducts, and other applications.

PP Package Air Heat Burner
Air Heating Package Burners

PP Package Air Heat Burner

Designed to offer the oven designer, process engineer or user a complete pre-wired, pre-piped burner package.

RSP Series Gas Burner
Air Heating Package Burners

RSP Series Gas Burner

Gas burners that are pre-packaged fan assisted units designed to suit virtually all types of low temperature gas fired application.

Selas DNS Series
Nozzle Mix Burners

Selas DNS Series

Features a unique cup-like design that allows combustion air and fuel gas to quickly and thoroughly mix at the nozzle.

Selas NM Series
Nozzle Mix Burners

Selas NM Series

The NM burner features short flames, wide turndown ranges and very stable combustion.

Selas XNM Excess Air Burner
Nozzle Mix Burners

Selas XNM Excess Air Burner

Nozzle mixing types designed for 800% excess air for single tunnel cool flame applications.

Selas Blast Tips – Steel or Alloy
Impingement Burners

Selas Blast Tips – Steel or Alloy

Blast Tips are compact premix nozzles designed for stable handling of high pressure fuel mixtures in small-volume applications where a jet of flame is appropriate.

Selas Blast Tips – Model BTSA – Alloy
Impingement Burners

Selas Blast Tips – Model BTSA – Alloy

Blast Tips for tunnel nozzle mix burners will provide extremely stable operation with air/fuel ratios ranging from 70% to 100% aeration.

Selas PRS Spear Flame Gas Burners
Impingement Burners

Selas PRS Spear Flame Gas Burners

Designed to produce a piloted spear-like heating flame allowing wide turn-down and offering flexibility, advantageous performance and long life.

Selas Extended Length Superheat<sup>™</sup> Burner
Impingement Burners

Selas Extended Length Superheat Burner

Constructed like refractory-lined furnaces in miniature and are capable of heating up to 25,000 BTU/hr/inch.

Selas Tunnel Burners
Impingement Burners

Selas Tunnel Burners

Will burn any standard fuel gas at mixture pressures ranging from 0.1 to 60 WC.

High Temperature Burners Reach 2800F: Selas Superheat
Impingement Burners

High Temperature Burners Reach 2800F: Selas Superheat

Increase the effectiveness of selective open heating by releasing high heat to very specific areas of a workpiece.

Industrial Gas Burner, Multiport PR Gas Type
Impingement Burners

Industrial Gas Burner, Multiport PR Gas Type

Combine positive flame geometry with maximum heat release and low turndown.

Selas Refrak<sup>™</sup> Screen Burners
Radiant Cup Burners

Selas Refrak Screen Burners

Sealed-in tunnel burners with superior flame retention and combustion characteristics.

Selas Duradiant<sup>®</sup> Furnace Wall Burners
Radiant Cup Burners

Selas Duradiant® Furnace Wall Burners

Comprised of two burner types (above and below 2000°F/1093°C), each furnace wall burner is manufactured in a high and low capacity range. Parts are ceramic or alloy.

Selas Duradiant<sup>®</sup> Semi-Furnace Burners
Radiant Cup Burners

Selas Duradiant® Semi-Furnace Burners

Designed for mounting into vertical refractory walls or panels with 4-1/2" (114mm) thick wall construction. All critical metallic parts are fabricated of heat resistant alloy steel.

Selas KVA Radiant Burners
Radiant Cup Burners

Selas KVA Radiant Burners

With a turndown of 20:1 and high speed radiant heat transfer, allows the position of the burner tip to change as the pressure by the fuel mixture changes.