Metals
Please choose your application:
- All Applications
- Annealing
- Brazing & Pre-heating
- Can Soldering
- Conveyorized Furnaces
- Conveyorized Ovens
- Curing Coatings on Metals
- Drying
- Furnace Flame Curtains
- Furnaces for Heating
- Gelling of Powder Coatings
- Heating Die Molds
- Heating Solder Pots
- Jewelry Manufacturing
- Localized Heating
- Moving Rods, Pipe, Tube
- Moving Strips
- Piloting
- Preheating
- Primary Heater or Booster for Heating Continuous Strip
- Roll Heating
- Shell & Cartridge Case Heat Treatment
- Silver Soldering
- Wire Annealing & Heating
Contact us to discuss your application with an experienced Selas engineer.
Results for All Applications
ERB QuadCool™ Ribbon Burner
ERB's SheetFlame ribbon design is port free and provides a uniform flame pattern producing striation-free product surfaces.
ERB Hi-Tri™ Trizone Burner
Features a new 2" 2-tube arrangement to improve heat recovery time and reduce waste in baking and other critical applications. Replaces the older 1.5" black pipe models for higher turndown.
ERB TriZone Burner
A direct replacement for any BP/APV Turkington pipe burner. Used primarily in bakeries and where an oven's heat profile needs to be modified.
ERB Pipe Burner Schedule 80
Can be utilized anywhere direct flame impingement is required, such as in bakery, wire, glass and plastics industries.
ERB Pipe Burner Schedule 160
Twice as heavy as our standard Schedule 80 pipe burners.
High Capacity Sheet Flame Burners
Designed for the treatment of plastic film, foil, textiles, non-woven fibers and in lamination. Constructed so all irregularities and breaks in the flame are eliminated.
ERB Special High Capacity, Triple Slot Burners
At 60,000 BTUs per inch, these direct impingement linear burners are the most powerful in the industry.
ERB High Capacity, Wide Slot Burners
When you require maximum linear heat, these impingement burners are the answer.
ERB Water Cooled Burners
Ensign exclusive! The only truly water-cooled ribbon burner where the cooling core is an integral part of the burner casting.
ERB Utility, T Burners
Designed for limited space applications requiring concentrated heat patterns, they provide a wide range of flexibility with respect to capacities, flame patterns and sizes.
ERB Lateral Heat Equalizer
The ideal means of providing balanced heating conditions in pipe ribbon burner installations, under adverse circumstances.
Selas Superflame™ Low NOx Medium & High Velocity Burners
Designed for process temperatures up to 2500°F (1371°C), and incorporates two-stage combustion for low NOx.
Selas SuperflameTM Pak
A pre-assembled and factory calibrated package burner, the SuperflameTM Pak Burner saves money and labor on installation and tuning and virtually eliminates routine calibration.
High Velocity Burners
Used primarily where a high recirculation rate of the products of combustion is required.
XDF Burners-Dual Fuel Excess Air Burners
Nozzle mixing oil or gas units designed for up to 350% excess air or on ratio firing.
High Velocity Single Tunnel Dual Fuel Burners
Nozzle-mixing high velocity burner which will burn most gaseous fuels as well as light distillate oils.
Red-Ray MR-12 Infrared Burner
Red-Ray’s MR-12 infrared burner has a durable fine porosity metal alloy refractory grid that has excellent resistance to impact, thermal shock and water damage.
Red-Ray® Apollo-Ray® Infrared Burners
AR Series burners are metal fiber infrared burners with high radiance and all-metal construction. The Apollo-Ray is available in two sizes.
Red-Ray Model K Burners
7-inch size with either cast iron or special alloy components. Employs an air-gas mixture impinging directly on the finned refractory surface to produce a high-density flux of maximum radiance.
Red-Ray Model F Gas Burners
Used in a wide range of industrial applications such as battery manufacturing, pre-drying, paint flow coating, resin curing, and roofing.
Red Ray E-Class Infrared Burners
6-inch gas impingement types which generate intense, concentrated radiation. They are typically used in industrial applications (curing coatings on steel) and food applications (baking).
Energy Sabre™ 600 Single-Ended Radiant Tube Burner
Patent pending design provides the highest efficiencies across all inputs, excellent heat flux and unmatched tube temperature uniformity.
PYR-PC Series Package Oven Burner
These burners can be installed in a process plant recirculation system where it is not possible to construct a combustion chamber and install a conventional type of burner assembly.
PYR-PP Package Air Heat Burner
Designed to offer the oven designer, process engineer or user a complete pre-wired, pre-piped burner package.
PYR-PH Series Package Oven Burner
Air heating burners that direct combustion air across distribution air foils to heat fresh or recirculated air in ovens, air ducts, and other applications.
PYR-RSP Series Gas Burner
Gas burners that are pre-packaged fan assisted units designed to suit virtually all types of low temperature gas fired application.
Pyronics® UHF Radiant Tube Burner
Compact, sealed nozzle-mix units designed to operate in radiant tubes with maximum combustion efficiency over varying operating conditions.
Single-ended Recuperative Radiant Tube Combustion System
Radiant tube burners are recuperative style and available as single end (SER) or direct fired (UHF).
HMB (High Momentum Burners) Low NOx High Velocity Burner
Pyronics High-Momentum Burners (HMB) are designed for process temperatures up to 2700°F Designed for process temperatures up to 2700 degrees F.
Pyronics® SW Flat Flame Burner
The swirling air stream produces a negative vortex at the mouth of the refractory block.
Pyronics® XNM Excess Air Burner
Nozzle mixing types designed for 800% excess air for single tunnel cool flame applications.
Pyronics® NM Series
The NM burner features short flames, wide turndown ranges and very stable combustion.
Selas DNS Series
Features a unique cup-like design that allows combustion air and fuel gas to quickly and thoroughly mix at the nozzle.
ERB Utility Burner
Ideal for small space applications requiring concentrated heat patterns.
Selas Superheat™ Burners
Increase the effectiveness of selective open heating by releasing high heat to very specific areas of a workpiece.
Selas PRS Spear Flame Gas Burners
Designed to produce a piloted spear-like heating flame allowing wide turn-down and offering flexibility, advantageous performance and long life.
Industrial Gas Burner, Multiport PR Gas Type
Combine positive flame geometry with maximum heat release and low turndown.
Pyronics® Blast Tips – Model BTSA – Alloy
Blast Tips for tunnel nozzle mix burners will provide extremely stable operation with air/fuel ratios ranging from 70% to 100% aeration.
Selas Refrak™ Screen Burners
Sealed-in tunnel burners with superior flame retention and combustion characteristics.
Selas KVA Burners
With a turndown of 20:1 and high speed radiant heat transfer, allows the position of the burner tip to change as the pressure by the fuel mixture changes.
Pyronics® Blast Tips – Steel or Alloy
Blast Tips are compact premix nozzles designed for stable handling of high pressure fuel mixtures in small-volume applications where a jet of flame is appropriate.
Selas Duradiant® Line Arrangement Burners
Provide close coupling of radiant heat sources, and are ideal for light-duty heating applications.
Selas Duradiant® Open Firing Radiant Cup Burners
Offer controlled radiant heat to improve product quality and enhance productivity. Available in a range of sizes, cup contours and housings, and mount in any position.
