Results for All Applications

High Velocity Burners
Velocity Burners

High Velocity Burners

Used primarily where a high recirculation rate of the products of combustion is required.

High Velocity Single Tunnel Dual Fuel Burners
Velocity Burners

High Velocity Single Tunnel Dual Fuel Burners

Nozzle-mixing high velocity burner which will burn most gaseous fuels as well as light distillate oils.

Selas Superflame™ Low NOx Medium & High Velocity Burners
Velocity Burners

Selas Superflame™ Low NOx Medium & High Velocity Burners

Designed for process temperatures 150,000 BTU/hr (KW) to 10,000,000 BTU/hr (KW), and incorporates two-stage combustion for low NOx.

XDF Burners-Dual Fuel Excess Air Burners
Velocity Burners

XDF Burners-Dual Fuel Excess Air Burners

Nozzle mixing oil or gas units designed for up to 350% excess air or on ratio firing.

Infrared Metal-Fiber Burners: Selas Apollo-Ray<sup>®</sup>
Infrared Burners

Infrared Metal-Fiber Burners: Selas Apollo-Ray®

AR Series burners are infrared metal-fiber burners with high radiance and all-metal construction and premix design. The Apollo-Ray is available in two sizes.

Selas MR-12 Infrared Burner
Infrared Burners

Selas MR-12 Infrared Burner

The Selas MR-12 infrared burner has a durable fine porosity metal alloy refractory grid that has excellent resistance to impact, thermal shock and water damage.

LP-86 Infrared Industrial Oven Burner
Infrared Burners

LP-86 Infrared Industrial Oven Burner

Widely used in tortilla chip ovens and many industrial ovens (ie. powder coating) requiring high heat flux density.

Selas E-Class Infrared Burners
Infrared Burners

Selas E-Class Infrared Burners

6-inch gas impingement types which generate intense, concentrated radiation. They are typically used in industrial applications (curing coatings on steel) and food applications (baking).

Selas Model F Gas Burners
Infrared Burners

Selas Model F Gas Burners

Used in a wide range of industrial applications such as battery manufacturing, pre-drying, paint flow coating, resin curing, and roofing.

Selas Model K Burners
Infrared Burners

Selas Model K Burners

7-inch size with either cast iron or special alloy components. Employs an air-gas mixture impinging directly on the finned refractory surface to produce a high-density flux of maximum radiance.

Energy Sabre<sup>™</sup> 600 Recuperative Radiant Tube Burner
Radiant Tube Burners

Energy Sabre 600 Recuperative Radiant Tube Burner

Patent pending design provides the highest efficiencies across all inputs, excellent heat flux and unmatched tube temperature uniformity.

PC Series Package Oven Burner
Air Heating Package Burners

PC Series Package Oven Burner

These burners can be installed in a process plant recirculation system where it is not possible to construct a combustion chamber and install a conventional type of burner assembly.

PH Series Package Oven Burner
Air Heating Package Burners

PH Series Package Oven Burner

Air heating burners that direct combustion air across distribution air foils to heat fresh or recirculated air in ovens, air ducts, and other applications.

PP Package Air Heat Burner
Air Heating Package Burners

PP Package Air Heat Burner

Designed to offer the oven designer, process engineer or user a complete pre-wired, pre-piped burner package.

Self-Recuperative Radiant Tube Combustion System
Radiant Tube Burners

Self-Recuperative Radiant Tube Combustion System

Radiant tube burners are recuperative style and available as single end (SER) or direct fired (UHF).

UHF Radiant Tube Burner
Radiant Tube Burners

UHF Radiant Tube Burner

Compact, sealed nozzle-mix units designed to operate in radiant tubes with maximum combustion efficiency over varying operating conditions.

Selas DNS Series
Nozzle Mix Burners

Selas DNS Series

Features a unique cup-like design that allows combustion air and fuel gas to quickly and thoroughly mix at the nozzle.

Selas NM Series
Nozzle Mix Burners

Selas NM Series

The NM burner features short flames, wide turndown ranges and very stable combustion.

Selas SW Flat Flame Burner
Nozzle Mix Burners

Selas SW Flat Flame Burner

The swirling air stream produces a negative vortex at the mouth of the refractory block.

Selas XNM Excess Air Burner
Nozzle Mix Burners

Selas XNM Excess Air Burner

Nozzle mixing types designed for 800% excess air for single tunnel cool flame applications.

Selas Blast Tips – Steel or Alloy
Impingement Burners

Selas Blast Tips – Steel or Alloy

Blast Tips are compact premix nozzles designed for stable handling of high pressure fuel mixtures in small-volume applications where a jet of flame is appropriate.

Selas Blast Tips – Model BTSA – Alloy
Impingement Burners

Selas Blast Tips – Model BTSA – Alloy

Blast Tips for tunnel nozzle mix burners will provide extremely stable operation with air/fuel ratios ranging from 70% to 100% aeration.

Selas Extended Length Superheat<sup>™</sup> Burner
Impingement Burners

Selas Extended Length Superheat Burner

Constructed like refractory-lined furnaces in miniature and are capable of heating up to 25,000 BTU/hr/inch.

Selas Duradiant<sup>®</sup> Line Arrangement Wall Burners
Radiant Cup Burners

Selas Duradiant® Line Arrangement Wall Burners

Provide close coupling of radiant heat sources, and are ideal for light-duty heating applications.

Selas Duradiant<sup>®</sup> Open Firing Radiant Cup Burners
Radiant Cup Burners

Selas Duradiant® Open Firing Radiant Cup Burners

Offer controlled radiant heat to improve product quality and enhance productivity. Available in a range of sizes, cup contours and housings, and mount in any position.