Results for All Applications

ERB QuadCool Ribbon Burner
Line and Ribbon Burners

ERB QuadCool Ribbon Burner

ERB's SheetFlame ribbon design is port free and provides a uniform flame pattern producing striation-free product surfaces.

ERB Hi-Tri™ Trizone Burner
Line and Ribbon Burners

ERB Hi-Tri™ Trizone Burner

Features a new 2" 2-tube arrangement to improve heat recovery time and reduce waste in baking and other critical applications.

ERB TriZone Burner
Line and Ribbon Burners

ERB TriZone Burner

A direct replacement for all BP/APV Turkington burners. Used primarily in bakeries and where an oven's heat profile needs to be modified.

ERB Pipe Burner Schedule 80
Line and Ribbon Burners

ERB Pipe Burner Schedule 80

Can be utilized anywhere direct flame impingement is required, such as in bakery, wire, glass and plastics industries.

ERB Pipe Burner Schedule 160
Line and Ribbon Burners

ERB Pipe Burner Schedule 160

Twice as heavy as our standard Schedule 80 pipe burners.

High Capacity Sheet Flame Burners
Line and Ribbon Burners

High Capacity Sheet Flame Burners

Designed for the treatment of plastic film, foil, textiles, non-woven fibers and in lamination. Constructed so all irregularities and breaks in the flame are eliminated.

ERB Special High Capacity, Triple Slot Burners
Line and Ribbon Burners

ERB Special High Capacity, Triple Slot Burners

At 60,000 BTUs per inch, these direct impingement linear burners are the most powerful in the industry.

ERB High Capacity, Wide Slot Burners
Line and Ribbon Burners

ERB High Capacity, Wide Slot Burners

When you require maximum linear heat, these impingement burners are the answer.

ERB Water Cooled Burners
Line and Ribbon Burners

ERB Water Cooled Burners

Ensign exclusive! The only truly water-cooled ribbon burner where the cooling core is an integral part of the burner casting.

ERB Lateral Heat Equalizer
Line and Ribbon Burners

ERB Lateral Heat Equalizer

The ideal means of providing balanced heating conditions in pipe ribbon burner installations, under adverse circumstances.

Selas Superflame™ Low NOx Medium & High Velocity Burners
Velocity Burners

Selas Superflame™ Low NOx Medium & High Velocity Burners

Designed for process temperatures up to 2500°F (1371°C), and incorporates two-stage combustion for low NOx.

Selas Superflame<sup>TM</sup> Pak
Velocity Burners

Selas SuperflameTM Pak

A pre-assembled and factory calibrated package burner, the SuperflameTM Pak Burner saves money and labor on installation and tuning and virtually eliminates routine calibration.

High Velocity Burners
Velocity Burners

High Velocity Burners

Used primarily where a high recirculation rate of the products of combustion is required.

XDF Burners-Dual Fuel Excess Air Burners
Velocity Burners

XDF Burners-Dual Fuel Excess Air Burners

Nozzle mixing oil or gas units designed for up to 350% excess air or on ratio firing.

High Velocity Single Tunnel Dual Fuel Burners
Velocity Burners

High Velocity Single Tunnel Dual Fuel Burners

Nozzle-mixing high velocity burner which will burn most gaseous fuels as well as light distillate oils.

Red-Ray MR-12 Infrared Burner
Infrared Burners

Red-Ray MR-12 Infrared Burner

Red-Ray’s MR-12 infrared burner has a durable fine porosity metal alloy refractory grid that has excellent resistance to impact, thermal shock and water damage.

Red-Ray Apollo Ray Infrared Burners
Infrared Burners

Red-Ray Apollo Ray Infrared Burners

AR Series burners are metal fiber infrared burners with high radiance and all-metal construction. The Apollo-Ray is available in two sizes.

Webster Combustion Boiler Burners
Boiler & Multi-Fuel Burners

Webster Combustion Boiler Burners

Webster Combustion boiler burners combine proprietary control technology with proven combustion performance to reduce your energy costs and emissions.

RAY Power Pressure Burners
Boiler & Multi-Fuel Burners

RAY Power Pressure Burners

Pressure Burners may be incorporated with all types of boilers, ovens, kilns, etc., up to 400 horsepower, to form completely automatic packaged burner units.

PYR-PC Series Package Oven Burner
Air Heating Package Burners

PYR-PC Series Package Oven Burner

These burners can be installed in a process plant recirculation system where it is not possible to construct a combustion chamber and install a conventional type of burner assembly.

PYR-PP Package Air Heat Burner
Air Heating Package Burners

PYR-PP Package Air Heat Burner

Designed to offer the oven designer, process engineer or user a complete pre-wired, pre-piped burner package.

PYR-PH Series Package Oven Burner
Air Heating Package Burners

PYR-PH Series Package Oven Burner

Air heating burners that direct combustion air across distribution air foils to heat fresh or recirculated air in ovens, air ducts, and other applications.

PYR-RSP Series Gas Burner
Air Heating Package Burners

PYR-RSP Series Gas Burner

Gas burners that are pre-packaged fan assisted units designed to suit virtually all types of low temperature gas fired application.

Pyronics UHF Radiant Tube Burner
Radiant Tube Burners

Pyronics UHF Radiant Tube Burner

Compact, sealed nozzle-mix units designed to operate in radiant tubes with maximum combustion efficiency over varying operating conditions.

Single-ended Recuperative Radiant Tube Combustion System
Radiant Tube Burners

Single-ended Recuperative Radiant Tube Combustion System

Radiant tube burners are recuperative style and available as single end (SER) or direct fired (UHF).

HMB (High Momentum Burners) Low NOx High Velocity Burner
Velocity Burners

HMB (High Momentum Burners) Low NOx High Velocity Burner

Pyronics High-Momentum Burners (HMB) are designed for process temperatures up to 2700°F Designed for process temperatures up to 2700 degrees F.

Pyronics SW Flat Flame Burner
Nozzle Mix Burners

Pyronics SW Flat Flame Burner

The swirling air stream produces a negative vortex at the mouth of the refractory block.

Pyronics XNM Excess Air Burner
Nozzle Mix Burners

Pyronics XNM Excess Air Burner

Nozzle mixing types designed for 800% excess air for single tunnel cool flame applications.

Pyronics NM Series
Nozzle Mix Burners

Pyronics NM Series

The NM burner features short flames, wide turndown ranges and very stable combustion.

Selas DNS Series
Nozzle Mix Burners

Selas DNS Series

Features a unique cup-like design that allows combustion air and fuel gas to quickly and thoroughly mix at the nozzle.

Pyronics Tunnel Burners
Impingement Burners

Pyronics Tunnel Burners

Will burn any standard fuel gas at mixture pressures ranging from 0.1 to 60 WC.

Selas Extended Length Superheat Burner
Impingement Burners

Selas Extended Length Superheat Burner

Constructed like refractory-lined furnaces in miniature and are capable of heating up to 25,000 BTU/hr/inch.

Selas Superheat Burners
Impingement Burners

Selas Superheat Burners

Increase the effectiveness of selective open heating by releasing high heat to very specific areas of a workpiece.

Selas PRS Spear Flame Gas Burners
Impingement Burners

Selas PRS Spear Flame Gas Burners

Designed to produce a piloted spear-like heating flame allowing wide turn-down and offering flexibility, advantageous performance and long life.

Industrial Gas Burner, Multiport PR Gas Type
Impingement Burners

Industrial Gas Burner, Multiport PR Gas Type

Combine positive flame geometry with maximum heat release and low turndown.

Selas Anti-Involution Burners
Impingement Burners

Selas Anti-Involution Burners

Employ a high velocity combustion method that provides uniform glass melting. This burner is ideal for use in fiberglass production.

Pyronics Blast Tips – Model BTSA – Alloy
Impingement Burners

Pyronics Blast Tips – Model BTSA – Alloy

Blast Tips for tunnel nozzle mix burners will provide extremely stable operation with air/fuel ratios ranging from 70% to 100% aeration.

Selas Refrak Screen Burners
Radiant Cup Burners

Selas Refrak Screen Burners

Sealed-in tunnel burners with superior flame retention and combustion characteristics.

Selas KVA Burners
Radiant Cup Burners

Selas KVA Burners

With a turndown of 20:1 and high speed radiant heat transfer, allows the position of the burner tip to change as the pressure by the fuel mixture changes.

Pyronics Blast Tips – Steel or Alloy
Impingement Burners

Pyronics Blast Tips – Steel or Alloy

Blast Tips are compact premix nozzles designed for stable handling of high pressure fuel mixtures in small-volume applications where a jet of flame is appropriate.

Selas Duradiant Line Arrangement Burners
Radiant Cup Burners

Selas Duradiant Line Arrangement Burners

Provide close coupling of radiant heat sources, and are ideal for light-duty heating applications.

Selas Duradiant Open Firing Radiant Cup Burners
Radiant Cup Burners

Selas Duradiant Open Firing Radiant Cup Burners

Offer controlled radiant heat to improve product quality and enhance productivity. Available in a range of sizes, cup contours and housings, and mount in any position.